Welcome to GameArt Online

Technical Paremeters
Disinfection channel G with Infrared temperature detection, hand sanitizer and ultra sonic mist disinfection  (can be disassembled)
Dimension (mm):	1230*1000*H2000mm
Specification:	1 Cabinet: The top of the Cabinet is made of high-quality cold plate paint, and the thickness of the plate is marked with a thickness of 1.0mm; 2 System: Adopt intelligent ultrasonic atomization disinfection system. By atomizing the disinfection liquid into 1-10 micron disinfection particles, it quickly attaches to the surface of human body or objects, thus eliminating the virus, which can effectively prevent the infection of new coronavirus 3 Power supply voltage: 220VAC 50HZ / power: 800W; 4 Door body: Transparent magnetic PVC soft glass curtain, with light resistance, no deformation, no brittleness and no hardness, high elasticity, antistatic, heat resistance 100 ℃, cold resistance -30 ℃; 5. Control: using intelligent induction system, personnel enter the automatic induction machine to automatically start disinfection, automatic shutdown after disinfection is completely convenient, no manual control operation; 6 Lighting: (1) Ceiling lights; 7 Scope of application: Disinfection of various personnel-intensive areas such as factories, industrial parks, residential quarters, stations, airports, hospitals, schools, government agencies, school buildings, shopping malls, etc.
Intelligent ultrasonic atomization disinfection system	Advantages of the system: 1. Ultrasonic atomization disinfection system can quickly kill viruses and bacteria carried by the human body and block the transmission of diseases; 2. The channel disinfection system can be completely diffused in 30 seconds, and the disinfection time only needs 5-15 seconds, which is not harmful to human health and safe to use; 3. The atomization effect is good, the logistics is multi-directional, the coverage is comprehensive, the adhesion is strong, the disinfection and sterilization effect is remarkable, and the efficiency is high; 4. The scope of disinfection is comprehensive, and the whole body is thoroughly disinfected, which can effectively cut off the source of infection, reduce the harm of viruses and bacteria, and leave no hidden dangers of disinfection. 5. Saving disinfection potion: The disinfection potion is atomized into 1-10 micron disinfection mist particles, which can be suspended in the air for a long time, can maintain the disinfection effect for a longer time, and effectively save the potion. Instructions: 1. The machine needs to be added with disinfectant first, and then used with electricity; 2. Install and add disinfectant step by step, take out the bucket and add disinfectant, then put the bucket back in place, place the pump in the water, and close the door; 3. Insert the power plug into the power socket, the LCD display lights up; 4. The disinfection channel is a fully intelligent system, no operation is required, and the fog is automatically sensed after entering. Key Description: E-STOP: Press the emergency stop button at any time to automatically cut off all outputs except lighting. When pressed again, the system returns to the initial state. This button is mainly for emergency operation. LIGHT: Use the "Illumination" button to switch on and off the disinfection channel lighting. Pressing this button is mainly used for lighting during maintenance. The machine will automatically turn off after 1 minute of inactivity. UP/DOMN: Before or after disinfection, adjust the spray delay time through the up and down keys, and adjust or select when entering the internal parameter setting Circuit board working time setting operation: Press the "emergency stop" button, directly through the up and down adjustment buttons to change the disinfection and atomization delay time, the adjustment range is 1-99 seconds, and is displayed by the two-digit digital tube. The system automatically saves the parameter 5 seconds after the adjustment value. caveat: 1. Prohibit the use of flammable disinfectants, such as alcohol; 2. It is not recommended to use strong acid or alkaline disinfectant, most customers choose hypochlorous acid (not sodium hypochlorite!), or hydrogen peroxide;
All-in-One Infrared temperature measurement and Hand sanitizer machine parameters	1.  Product name: All-in-One Infrared temperature measurement and Hand sanitizer machine. 2.  Product size: 128*70*300mm 3.  Product material: ABS+PC 4.  Max power: 3w 5.  Power supply: 4AA battery or DC5v 2.1A 6.  Temperature taking mode: infrared induction 7.  Temperature measuring distance: 1-5cm 8.  Temperature measurement: (32oC~42.9oC, 89.6oF~109.2oF) 9.  Temperature measuring time: 2 second 10.Error: +/- 0.2oC 11.Bottle capacity: 300ml 12.Types of liquid: Hand Sanitizer 13.Liquid way: infrared induction 14.Working environment: 1oC~35oC(33.8oF~95oF); humidity<85% 15.Storage environment: -20oC~55oC(-4oF~131oF); humidity<85% 16.Temperature unit: Celsius (oC) / Fahrenheit (oF)